STANDARD SYSTEM Solid Glass Look Sheets
The Standard System consists of multi-walled polycarbonate sheets with UV protection in different structures, colors and sizes, offering high permeability, durability and thermal insulation.

NOVALÜX SYSTEM Low Weight Sheets
It can be applied even in commonly used thicknesses (6-10-16), so that Novalux has low weight as well as high thermal insulation and mechanical strength.

TEKNOLÜX SİSTEM Four Wall / Honeycomb Textured Sheets
* The growth in demand for high-performance products led to the development of a new type of polycarbonate sheet. Teknolüx (4-walled) is a new series of plates. Very high mechanical strength

ASSAN R3 FOR SANDWICH PANELS

• Natural Lighting Comfort for Your Factory

In terms of country economy and production cost; It is very important to benefit from daylight in lighting for energy saving, production quality and comfort of the employee.

Advantages of daylighting in industrial buildings;

* Increased working speed,
* Reduced defective production,
* Reduced material and energy waste,
* Prevention of occupational diseases and work accidents
* Increased efficiency of qualified personnel,
* Increasing efficiency and quality,

• SKL 30 BUILDING SYSTEM (10 year warranty)

• Polycarbonate Panels For Sandwich Panels

SKL System is produced to create skylight areas on flat roofs covered with sandwich panels. The SKL System is the only right product for any type of roof sandwich panel that meets different expansion of polycarbonate and metal sheets along the entire length of the roof slope. The assembly combination detail produced for each different roof sandwich panel enables fast, easy and safe connection without any water effect. With the SKL System, we shine a light on your wind, water and heat loss problems. Thanks to its high thermal insulation, UV protection and durability, you can reach the light you desire with the SKL System in a safe and best quality / price ratio.

In industrial buildings, it can be used for lighting purposes together with heat insulating roofing materials. Due to its high thermal insulation and high light transmittance, it is an alternative thermal insulation and lighting material. The fact that the material is 3-eyed provides imprisonment in these eyes and equivalent insulation is provided with heat-insulating materials. Thus, it does not allow the formation of a thermal bridge on the roof.

• Wave and Trapezoidal Section Panels

The WT System consists of single-walled solid-walled polycarbonate sheets with one or two sides of UV protection in different forms with undulating and trapezoidal grooves. It allows to solve technical lighting problems due to its compatibility with metal roof panels and its extraordinarily high light transmittance. The fixing accessory series completes quick and safe assembly. It is an excellent choice for versatile areas such as warehouses, greenhouses, fertilizer production farms, and terraces that do not require thermal insulation.

• Wave and Trapezoidal Section Panels

The WT System consists of single-walled solid-walled polycarbonate sheets with one or two sides of UV protection in different forms with undulating and trapezoidal grooves. It allows to solve technical lighting problems due to its compatibility with metal roof panels and its extraordinarily high light transmittance. The fixing accessory series completes quick and safe assembly. It is an excellent choice for versatile areas such as warehouses, greenhouses, fertilizer production farms, and terraces that do not require thermal insulation.

Locked Modular System Polycarbonate Panels

BDL System provides the most suitable solution for all types of inclined or flat roof lights, where high light transmittance, thermal insulation and load resistance are required. BDL System consists of 4-wall polycarbonate panel and Polycarbonate or aluminum locks and accessories that connect the panels for fast, practical assembly.

With the BDL System, economic and safe solutions are achieved as it provides fast and easy workmanship as well as construction lightness. The UV protective layer on both sides ensures that BDL 10 and BDL 16 panels maintain their mechanical and physical properties without changing their durability and light transmittance.

•  Solid Cam Görünümlü Levhalar

 Solid Sistem değişik kalınlık, renk ve ölçeklerde bir veya iki yüzü UV koruyuculu tek kat polikarbonat levhalardan oluşmaktadır. Solid levhaların, optik yapısı sayesinde mükemmel ışık geçirgenlik kalitesi, bu ürünü geniş ve çeşitli sektörlerde kullanıma uygun hale getirir. Üstün fiziksel ve kimyasal özellikleri sayesinde sağlamlık sertlik gerektiren mekanik zorlamalara karşı yüksek mukavemeti solid levhaların çok yönlü kullanımına olanak sağlamaktadır. Yapılarda; çatı ışıkları, korkuluk, güvenlik camı Reklam sektörü, Işıklı tabela, trafik işaretleri, Elektrik Aksesuarları; Lamba camı ve gövdesi, panolar Makineler; Koruyucu bölmeler, seperatörleri, Koruyucular; Kasket siperliği, güvenlik kalkanları Endüstride; Gözlük camı, otomasyon ürünlerinde kullanılır.

• C.T.P. Transparent Corrugated, Flat and Trapezoidal Sheets

* Flexible, lightweight, shockproof C.T.P.
transparent sine and trapezoidal corrugated sheets,
* Natural lighting feature,
* Homogeneous light distribution,
* Single use,
* Use with all roofing materials,
* Structure that is not affected by chemicals,
* U.V. radiation resistance and film covered production.

• Profile Types

Profile Code Profile Form Thickness Weight (gr / mtul)
Fibroser STD Fibroser EXT

452 500/341000 R3 Assan 1.2 mm 1875 2015
1.5 mm 2344 2519

•ASSAN MASTER PANEL 915 R3 FORM

Profile Code Profile Form Thickness Weight (gr / mtul)
Fibroser STD Fibroser EXT

434 164/34 Assan Master Panel 1000R 0.9 mm 1563 1680
1.2 mm 2084 2239

• ASSAN 27/200 TRAPEZE FORM

Profile Code Profile Form Thickness Weight (gr / mtul)
Fibroser STD Fibroser EXT

451 151/38 Assan 38/151 0.9 mm 1389 1493
1.2 mm 1852 1991

• ASSAN 38/151 TRAPEZE FORM

Profile Code Profile Form Thickness Weight (gr / mtul)
Fibroser STD Fibroser EXT

410 100/18 Panel 0.9 mm 1273 1369
1.2 mm 1698 1825

• C.T.P. Roof and Facade Cladding Panels

*Fibropan roof and facade cladding panels are produced opaque in sinus and trapezoidal grooved sections.
* It can be applied to all roof materials,
* Aesthetic approach with standard and desired color options.
* Resistant to industrial factors and acidic environments,
* Provides more thermal insulation due to low thermal conductivity coefficient,
* It is not affected by high and low air temperatures,
* It is not affected by sudden thermal changes, does not expand,
* Has high sound insulation,
* Resistant to chemicals,
* Hygienic, does not produce bacteria and germs,
* High carrying capacity,
* Both sides are colored, the color is permanent, does not fade,
* It is impact resistant, unbreakable, crackable, lightweight.

•

C.T.P. Double Layer Transparent Panels

Termopan are double-coated transparent panels that are used in roof and facade coatings of industrial buildings, compatible with metal sandwich panels, assembled at the factory or on site ready for installation.
Two Fibroser C.T.P. These are transparent panels formed by placing a high-density polyethylene sponge between the transparent panel. It consists of different varieties produced on a project basis in accordance with special applications and needs.
Termopan panels are produced as natural transparent as standard. It can also be produced semi-opaque to reduce the effect of heat (swimming pool, gyms).