Master Panels

915 R3 (POLYURETHANE ROOF PANEL)

Application place: Roofing
Metal Properties:
a) Assan Aluminum Production, high condition, Etial 30 Series Aluminum alloy
b) Painted Galva

1000 W (POLYURETHANE HIDDEN SCREW FACADE PANEL)

Useful Width: 1000 mm
Application: Facade Cladding
Metal Properties: Painted Galvanized Sheet
Topcoat poly on lining

MICRORIB 1000W

Application: Facade Cladding
Metal Properties:
a) Assan Aluminum Production, high condition, Etial 30 Series Aluminum alloy
b) Painted Galvanized

38/151 FORM TRAPEZE

Plate Thickness: 0.50 – 0.60 mm GALV.or BGS., Min 0.40 mm, max.1.20 mm ALÜ.
Sheet length: Min. 1000 mm, max. 12000 mm
Sheet useful Area Width

27/200 FORM TRAPEZE

Plate Thickness: Min.0.50 mm – 1.25 mm GALV.or BGS.
Sheet length: Min. 1000 mm, max. 12000 mm
Sheet useful Area Width: 800 mm

18/838 FORM SINUS CORRUGATED

Plate Thickness: Min. 0.50 – GALV.or BGS.
Sheet length: Min. 1000 mm, max. 12000 mm
Sheet useful Area Width: 838 mm
(Tolerance)

50/207 FORM TRAPEZE

Plate Thickness: 0.50 mm, max. 1.25 mm GALV., 0.50-0.70 mm BGS.
Sheet length: Min. 1000 mm, max. 12000 mm
Sheet useful Area Width:

Screws Installation Closing the Cap Closing the Cap

Flat ridge assembly Radius ridge assembly

• TRANSPORT AND PROTECTION OF SANDWICH PANELS

When lifting with a crane, protect the material from sling crush, and place the lower carriers according to the dimensions.

Raise the panel in the stack at both ends of the stack, at the ends and in the middle, if it is long, do not pull. Pulling can be the cause of scratches, especially in painted panels.

If possible, take the panels that will wait for a long time at the construction site to the closed area.

Protect the panels from external factors, even in a short wait period, if possible, select a slightly sloping area to avoid water accumulation.